If you are looking for the ultimate suspension exotica then it has to be the Push ElevenSix coil shock. A shock that rides like no other on the market with a damper tune selected specifically for your weight and your bikes leverage rate meaning you'll get the perfect ride feel every time!
Exquisite levels of machining precision and the highest quality materials used in every component and perfectly tuned to your Yeti's Switch Infinity Linkage.
One of the key features of the new ElevenSix shock is the Hydrualic Bottom Out Control system. This secondary shaft piston provides large increases in compression damping during the last 15% of shock stroke. Because it's completely independent of the main damping piston there are no compromises in the shock's performance throughout the stroke.
Say goodbye to harsh bottoming as the new Hydraulic Bottom Out Control allows you to ride harder and go bigger with a smooth and supportive end of stroke feel.
Working with HyperCo, a world leader in performance racing springs, ensures that only the finest materials and most advanced spring designs are utilized for each ELEVENSIX shock. Offered in 25lb/in increments, each HyperCoil is specifically designed to be the lightest and most accurate MTB spring available today. The exclusive OBD design allows for perfect positioning of the end coils for an extremely linear compression characteristic that is not only great for performance but keeps the spring from making noise, rubbing, and binding on the shock body.
To complement the linear HyperCoil spring, progressive open-cell rod bumpers are specifically engineered to control ending-stroke progression and spring rate, giving riders plush initial travel with plenty of ramp-up to control the handling of large jumps and drops.
As a rear shock spring is compressed the ends rotate slightly causing binding and a loss of small bump sensitivity in traditional MTB shocks.
Each ELEVENSIX however, features our exclusive PTX spring bearing and 360 degree captured spring retainers to ensure that this rotation happens friction-free leading to increases in small bump sensitivity and traction.
The Patented Dual Overhead Compression Valve System on all Push ElevenSix shocks allows you to dial in two separate sets of compression settings.
The light grey valve set is tuned to be adjusted for descending giving you both high and low-speed compression adjusters and then the dark grey valve set is tuned to give you a much firmer platform for trail or climbing characteristics but still has dedicated high and low-speed adjustments.
Just use the toggle switch to move from one valve set to the other!
All of this adjustment also now comes easier than ever. The new ELEVENSIX features completely sealed adjusters that are re-shaped, larger in size, and feature an internal bushing system to make them easy to turn.
The ElevenSix now has an increased range of adjustments to help you get the perfect damping feel.
25 Clicks of External Low-Speed Compression Adjustment
25 Clicks of External High-Speed Compression Adjustment
18 Clicks of External Low-Speed Rebound Adjustment
The damping piston found in the all-new ELEVENSIX features completely redesigned compression and rebound port profiles, providing smoother flow and an increase in damper response leading to a more controlled ride. The new piston assembly also features reconfigured progressive compression and rebound valving stacks providing less damping on small and high-frequency bumps while providing greater damping on larger impacts and g-outs.
This new design delivers just the right amount of damping to maximize both comfort and control.
In order to ensure consistent traction and bump-eating performance even on the most demanding descents, the ELEVENSIX features a large volume reservoir and IFP. The large area and unique seal gland design of the IFP allow for minimal movement in high-frequency bumps mimicking the low friction characteristic of a bladder system and increasing traction without the negative attributes such as gas migration and bladder deformation from heat.
Decreasing friction directly leads to increases in small bump sensitivity and traction providing a more comfortable ride. PUSH precision-ground and hardened spherical ball bearings eliminate both rotational frictions from linkages as well as shaft binding friction caused by flex under load. Quickly realizing that traditional off the shelf bearings were not up to the task, PUSH engineers went to work developing a specific system to address both the harsh riding conditions as well as high loads with unparalleled durability.
We are in the unique position to offer you in-house suspension service and custom tuning through our sister business Plush Suspension.
We can support you with all your suspension service needs as well as offer our unique Plush Setup service to get your entire suspension setup dialled in for your weight and riding style.
We can even custom tune your Push suspension to get the best possible performance from you and your bike!
Click below to read more about Plush Suspension service and tuningPlush Suspension
This is a loan, your monthly repayments will be for months with a final repayment of . The total amount payable is . % APR representative.
Consumer credit services are only available to over 18s and subject to status.
Credit is provided by V12 Retail Finance Ltd, a trading name of Secure Trust Bank Plc. which is registered in England and Wales: 541132. Registered Office: One Arleston Way, Solihull, B90 4LH. Secure Trust Bank Plc is authorised by the Prudential Regulation Authority and regulated by the Financial Conduct Authority and the Prudential Regulation Authority with registration number 204550. For more information please visit www.v12retailfinance.com.
This tool is for estimation purposes only. Actual finance application is completed during checkout.
To be eligible for finance you must:
Meeting this criteria does not guarantee acceptance. Applications from students (unless employed at least 16 hours per week), or unemployed single house persons will not be considered. Applications are welcome from retired individuals in receipt of a private or company pension (aged 50 or over at date of application). As part of the application a search will be made on your credit history.
If you are intending to use finance as your payment option, please note we will only ship your order to your billing address, and not to an alternative delivery address.