The OneUp EDC Lite puts a folding multi-tool at the top of a compatible fork steerer. It is the compact option for riders who mainly want the common hex sizes, a T25 and a screwdriver within reach, with the tool and carrier supplied together.
The carrier uses the existing star nut after it has been repositioned according to the fitting instructions. Before installation, use the OneUp fork compatibility checker and EDC Lite compatibility guide to check your fork and steerer dimensions.
Nine functions: 2, 2.5, 3, 4, 5, 6 and 8mm hex, T25 and flat screwdriver.
Manufacturer system weight 75g.
Includes multi-tool, Lite carrier, tool clip, star-nut setter bolt and headset preload bolt.
Minimum steerer internal diameter 24.1mm; required length also varies by fork.
Not compatible with carbon steerers, Giant Overdrive 2, RockShox 35-series or Cannondale Lefty forks.
Specifications
Functions
9
Hex sizes (mm)
2, 2.5, 3, 4, 5, 6, 8
Other tools
T25, Flat screwdriver
System weight (g)
75
Minimum steerer internal diameter (mm)
24.1
Box contents
EDC multi-tool, Lite carrier, Tool clip, Star-nut setter bolt, Headset preload bolt
The included folding tool covers the common hex sizes, T25 and flat screwdriver. Lift it out of the carrier when a bolt needs attention, then put it back on the bike.
A compact steerer installation
The Lite carrier stores the tool above a repositioned star nut. The fitting hardware is included, but the fork and steerer must pass OneUp's compatibility checks before installation.
Choosing a selection results in a full page refresh.
