The OneUp Threadless Carrier stores a separate EDC V2 Tool inside a compatible fork steerer without cutting threads into the steerer. The carrier replaces the star-nut arrangement and secures from below the fork crown.
It accepts the V2 Tool with the small capsule and Plug Kit, but not the large capsule, pliers or a CO2 cartridge. Check the exact fork, internal dimensions and measured length with the OneUp fork compatibility checker before ordering. Carbon steerers are not compatible.
6061-T6 aluminium carrier with steel bolts; manufacturer weight 35g.
Includes lower cap, star-nut removal bolt and washer, plus 40, 60, 80 and 100mm installation bolts.
EDC V2 Tool and Plug Kit sold separately. V1 EDC Tool is not compatible.
RockShox 35, Giant Overdrive 2 and Cannondale Lefty forks are excluded by the fitting guide. Other models still require the current compatibility check.
Installation requires star-nut removal and the full OneUp fitting procedure.
Specifications
Material
6061-T6 aluminium with steel bolts
Weight (g)
35
Included bolt lengths (mm)
40, 60, 80, 100
Box contents
Threadless Carrier, Lower cap, Star-nut remover bolt and washer, Four installation bolts
Tool included
No
Accepted tool
EDC V2 with small capsule
Not accepted
V1 EDC Tool, Large capsule, Pliers, CO2 cartridge, Carbon steerer
The carrier holds an EDC V2 Tool with its small storage capsule inside a compatible steerer. It gives you an accessible place for everyday tools and a separately purchased Plug Kit.
Fit without tapping the steerer
The lower cap and bolt secure the carrier after the star nut is removed. The supplied bolt lengths suit different approved installations; fork compatibility still needs checking before fitting.
