The OneUp EDC Threaded Top Cap makes the steerer a storage location for a separately purchased EDC V2 Tool. It leaves the tool accessible from the top of the cockpit and allows either storage capsule where the particular fork has enough internal space.
This system requires the top of a compatible aluminium steerer to be tapped using OneUp's separate tap kit. Check your exact fork and dimensions with the OneUp fork compatibility checker before ordering or modifying the steerer. Carbon and steel steerers are not compatible.
Includes threaded top cap, steerer plug and headset spacers in 1mm, 3mm and 5mm sizes.
Manufacturer component weights: top cap 5g; steerer plug 15g.
EDC V2 Tool, tap kit and any Plug & Pliers Kit are sold separately.
Capsule and accessory clearance depends on the fork; check the current fitting guidance and your fork manufacturer's requirements.
Specifications
Top cap weight (g)
5
Steerer plug weight (g)
15
Box contents
Threaded top cap, Steerer plug, Headset spacers
Tool included
No
Tap included
No
Steerer requirement
Compatible aluminium steerer, professionally checked before tapping; no carbon or steel
Once correctly fitted, the threaded top cap gives access to an EDC V2 Tool at the top of the steerer. The tool can come out for a repair without unpacking a bag.
Choose the storage your fork allows
The threaded system can accommodate a small or large EDC capsule where the fork has enough room. That gives scope for a compact plug kit or a larger repair setup, with accessories sold separately.
